CineEye 2

*CineEye 2 features 500ft transmission range.

Transmission Range up to 500ft/150m

Support wide shooting range

CineEye 2 can cover you range-wise for most shooting applications without range issues, as long as you’re not storing your clients or crew half a kilometre away or in the sub-basement, you should be fine.

HDMI In and HDMI Loop-out

Dual HDMI ports

HDMI In and HDMI Loop-out

CineEye 2 wireless video transmitter features one HDMI in and one HDMI loop out. For HDMI loop out, you can use it to output video to monitor on the camera or connect recorder, light, and live stream equipment, which helps the videomaker equip more accessories on the gimbal.

One Transmitter for 4 Devices

Monitor on 4 screens simultaneously

With CineEye 2 wireless video transmitter, you can use up to 4 devices to monitor at the same time, which helps you to keep the whole crew in the loop while shooting. Whether you are a videographer, crewmember or makeup artist, you will get a chance to monitor the real-time images.

One Transmitter for 4 Devices
*CineEye 2 allows users to monitor on big screen.

HD and Noiseless

High-quality Video and Audio Transmission

With CineEye 2, beautifully clear images are transmitted with almost no delay at up to 1080P/60 and noiseless audio is transmitted through 44.1KHz/48KHz 16bit/24bit.

HD and Noiseless
foldable Antenna
*CineEye 2 features foldable antenna.

foldable Antenna

Easily set up and get started

CineEye 2 is innovatively designed with a pair of fodable antenna. It’s easy for videographers to set up and carry the CineEye 2. You just unfold its antenna, connect it, and get started.

Professional Monitoring App – Accsoon GO

Terrific, Stable, and Intuitive

Accsoon GO features a majority of functionality tools such as greyscale, RGB, histogram, waveforms, focus peaking, grids, as well as audio and video recording in the App. It also has LUTs and you can install your LUTs onto the device. There’s more functionality built into this app as a monitor than some dedicated monitors.

Accsoon GO
*CineEye 2 can pair with up to four mobile devices.

Pocket But Powerful

Compact size, low power consumption and no-fan design

CineEey 2 is a real pocket video transmitter features very low power consumption, a single NP-F970 battery can last you 14 hours. CineEye 2 also has no fans inside, ensuring zero fan noise and a complaint-free sound department.

Pocket But Powerful
*CineEye 2 is compact and lightweight.

1.3 inch OLED Screen

Provide institutive screen for you

CineEye 2 is equipped with a clear OLED screen, which is easy to check input video and audio info, battery level, connection status, WiFi signal and channel selection. All information at a glance.

1.3 inch OLED Screen
Firmware Upgrade
*CineEye 2 firmware can be updated easily.

Firmware Upgrade

The easiest way to upgrade

There is no complicated process to upgrade the firmware of CineEye 2. You just need to use Accsoon’s official App: Accsoon Go to do a quick upgrade.


Video InputHDMI
Video OutputHDMI
Video Format1080p 23.98/24/25/29.97/30/50/59.94/60fps
1080i 50/59.94/60fps720p 50/59.94/60fps480p 59.94/60fps
Audio44.1KHz/48KHz 16bit/24bit PCM
Latency<0.06 seconds (Camera latency not included)
OLED1.3 inch OLED
Transmission Power17~20dBm
Transmission Range500 feet(no obstacles, no interference)
Power Consumption3.5 Watt (Typical)
APPiOS8.0 or above/Android 7.0 or above
Operating Temperature-10~40℃
Dimensions108mm×68.5mm×30mm(Antenna not included)


CineView 2 SDI
CineView SE
CineView HE
CineView Quad
CineView Nano