CineEye 2S

Suit for more cameras
*CineEye 2S features SDI and HDMI inputs.

SDI In & HDMI In

suitable for more cameras

The CineEye 2S has an HDMI input as well as an SDI input. No matter what kind of camera you have, you can use CineEye 2S wireless video transmitter to complete image and voice transmission.

Ultra-low latency

Claimed <0.06 s

CineEye 2S quotes a figure of 60ms for latency. While most camera devices add to the problem of latency in shooting, CineEye 2S has an almost imperceptible latency of fewer than 60ms, which guarantees the synchronization of shooting.

Ultra-low latency
500ft/150m
*CineEye 2S features 500ft(150m) transmission range.

Real-time remote monitor

Transmission Range up to 500ft/150m

With CineEye 2S, you can easily get up to 500ft/150m far away and still have a stable signal, this is usually going to be achievable on flat, open terrain where there is little wireless interference. In most cases, CineEye 2S can exceed operating claimed distance by a wide margin.

FAST VIDEO AND AUDIO TRANSMISSION

Fast video and audio transmission

High Resolution & Low Buzz

CineEye 2S supports multiple video input of up to 1080p/60fps, also supports 44.1kHz/48kHz 16bit/24bit also input, and it streams the audio with low compression codec, giving you near lossless audio monitoring experience.

Hook Up With 4 Screens

Multi-screen & co-monitoring

CineEye 2S allows you to monitor your camera feeds wirelessly on multiple iOS and Android devices. Rigging up a lightweight CineEye 2S to a camera so that directors, makeup artists, or even a production designer can see images, which is an affordable way to offer a wireless feed to clients or crewmembers you work with.

Hook Up With 4 Screens
Hook Up With 4 Screens
With Fanless Design

With Fanless Design

Quiet transmitter with low power consumption

CineEye 2S differs from other built-in fans wireless video transmitters in that it adopts a fanless setup to gain ultra-clear audio and ultra-low power consumption.

Professional monitoring App: Accsoon Go

Assist Your Shooting Work

Accsoon GO App is more than just a viewer. It gives you the ability to activate monitoring functions such as greyscale, RGB, histogram, waveforms, focus peaking, grids etc. You even get the ability to operate video and audio recordings with this APP.

Accsoon Go
functions

Easy Firmware Updates

Rely on the official App: Accsoon Go

Only download Accsoon’s official App: Accsoon Go from the iOS or Android application store. Then use Accsoon Go to upgrade your CienEye 2S.

Easy Firmware Updates

1.3 inch Build-in OLED Screen

The whole information at a glance

On the front side of the CineEye 2S is a small-sized OLED display where you can see crucial information and make changes, such as input video and audio info, battery level, connection status and current 5G WiFi channel.

1.3 inch Build-in OLED Screen
*CineEye 2S features 1.3inch OLED screen.
Easily Set up & Carry

Easily Set up & Carry

Foldable Antenna and Compact Size

120 degree foldable antenna, portable but with powerful signal. Compact design makes it a real pocket wireless video transmitter.

DC Port Power or Optional Battery

Depending on your charge preference

CineEye 2S has in-built battery plates that can take Sony NP batteries. You also have the option to power it through a 7.4V-16.8V DC input. Charge the way you like.

Optional Battery
*CineEye 2S features hot swap.

SPECIFICATIONS

ProjectsTransmitter
Video InputSDI/HDMI
SDI (Level A)1080p 23.98/24/25/29.97/30/50/59.94/60fps
1080p 23.89/24/25/29.97/30fps
HDMI1080p 23.98/24/25/29.97/30/50/59.94/60fps
720p 50/59.94/60fps 480p 59.94/60fps
Audio44.1KHz/48KHz 16bit/24bit PCM
Latency<0.06 seconds (Camera latency not included)
OLED1.3 inch OLED
Transmission Power17~20dBm
Transmission Range500 feet(no obstacles, no interference)
Power Consumption4 Watt (Typical)
APPiOS8.0 or above/Android 7.0 or above
Operating Temperature-10~40℃
Dimensions108mm×68.5mm×30mm(Antenna not included)
Weight213g

RELATED PRODUCTS

cv-he
CINEVIEW HE
cv-se
CINEVIEW SE
cv-quad
CINEVIEW QUAD