CineView Nano

Smaller, Lighter, Simpler

Accsoon CineView Nano is a smaller, lighter version of the CineView wireless system. The CineView Nano accepts up to a full HD 1080p60 HDMI signal via a HDMI port, and it wirelessly transmits the signal to up to four separate iOS/Android mobile devices at the same time. The signal is sent over 5GHz up to 500ft line of sight with a low latency of approximately 60ms.

Ultra-Compact, Pocket-Sized Design

About 76mm x 113mm in size, CineView Nano weighs only 72.3g and is less than half the weight of the CineView HE/SE transmitter. It also has an aluminum housing for durability. Two integrated antennas built in to maintain the small size. 

Ultra-Compact, Pocket-Sized Design

HDMI Monitoring Made Easier

CineView Nano features one HDMI-in port and uses 5G WiFi signal to send video wirelessly to up to 4 tablets or phones with both Android or iOS system.

HDMI Monitoring Made Easier

Low Latency, Long Range

With an average latency of around 60ms, Nano has nearly undetectable lag that transmits to a maximum distance of 500ft.

Low Latency, Long Range

With an average latency of around 60ms, Nano has nearly undetectable lag that transmits to a maximum distance of 500ft.

Mounting & Powering

CineView Nano offers a 1/4″-20 mounting point on the bottom and can easily be mounted on your camera. It also features a well-designed phone holder to secure your phone while monitoring.

Mounting & Powering

CineView Nano offers a 1/4″-20 mounting point on the bottom and can easily be mounted on your camera. It also features a phone holder to secure your phone while monitoring.

nano-HDMI-Monitoring
Mounting & Powering-11

Get More Out Of Accsoon See App

Desqueeze

On your gimbal too

Alternatively, the phone clamp can be detached and replaced with a gimbal attachment plate compatible with DJI RS2/RS3 gimbals. This conveniently situates the CineView Nano underneath the camera mounting plate for optimal balance and ease of access.

On your gimbal too

On your gimbal too

Alternatively, the phone clamp can be detached and replaced with a gimbal attachment plate compatible with DJI RS2/RS3 gimbals. This conveniently situates the CineView Nano underneath the camera mounting plate for optimal balance and ease of access.

mobile-On your gimbal too

Specifications

ProjectsCineView Nano
Video InputHDMI
Video Output1080p 23.98/24/25/29.97/30/50/59.94/60fps
Audio44.1KHz/48KHz 16bit/24bit PCM via HDMI
Latency<0.06s (Camera latency not included)
Transmission Power17~20dBm
Transmission Range500ft (No obstacles, no interference)
Power Consumption2.5 Watt (Without charging other devices)
Operating Environment Temperature-10~40°C
Dimensions76mm × 113mm × 20mm
Weight72.3g

Choose the Right CineView for You

SE
CineView SE
HE
CineView HE
QUAD

CineView Quad 

nano

CineView Nano

CineView SECineView HECineView QuadCineView Nano
Latency<50ms<60ms<60ms<60ms
Range1200ft1200ft500ft500ft
Input&OutputSDI IN&OUT
HDMI IN&OUT
HDMI IN&OUT
HDMI LOOP OUT
UVC Live Streaming
SDI IN&OUT
HDMI IN&OUT
HDMI IN
AntennaSwappable
Antenna*
Swappable
Antenna*
Built-in
Antenna
Built-in
Antenna
Powered ByNP-F Battery
7.4-16.8V DC IN
5V USB-C IN
NP-F Battery
7.4-16.8V DC IN
5V USB-C IN
NP-F Battery
7.4-16.8V DC IN
NP-F Battery
5V USB-C IN
Dimensions105mmx66mmx32mm
(Antennas not included)
105mmx66mmx32mm
(Antennas not included)
105mmx66mmx31mm
(Antennas not included)
76mmx113mmx20mm
Weight210g (Antennas not included)200g (Antennas included)225g (Antennas included)72.3g

RELATED PRODUCTS

cv-he
CINEVIEW HE
cv-se
CINEVIEW SE
cv-quad
CINEVIEW QUAD
nano
CINEVIEW NANO