Product Support
How-to guides and technical help
Get Started
Accsoon F-C01
The Accsoon F-C01 is a small, responsive and reliable wireless focus system that includes a 0.35 N·m high-torque motor with near real time response and excellent 350ft control range. Learn more
Documents
Tutorial Videos
FAQ
1. If the host headset was powered off, or the distance between host and remote headsets is too far, the remote headsets will be disconnected from the host, and the indicators on the remote headsets will turn into slow green flickers and play “Disconnected” voice prompt.
2. When the remote headsets are disconnected from the host headset, you can reconnect the headsets by powering on the host headset or put the host and remote headsets back into the communication distance, the remote headsets will automatically reconnect to the host headset. Remote headsets’ indicator will stay on with green light and will play “Connected” voice prompt.
1. Switch the power button on both the host and remote headsets to ON”.
2. Press and hold the pairing button on the host headset for 3 seconds to enter pairing mode. The indicator will show fast green flickers, with no prompt voice.
3. Press and hold the pairing button on remote headsets for 3 seconds to enter pairing mode. The remote headsets will play “Pairing” voice prompt, and the indicator will show fast green flickers.
4. If the pairing succeed, remote headsets will play “Pairing success” voice prompt and the indicator will show slow green flickers.
5. Please press and hold the pairing button on the host headset for 3 seconds to exit pairing.
Note: Please ensure you exit pairing mode before using Accsoon CoMo for communication.
1. One host headset can connect and memorize 8 remote headsets at the maximum. If your host headset’s memory isn’t fully used, you can follow previous guideline to pair and add new remote headset(s).
2. A single remote headset can only store pairing information of one host headset at a time. To pair it with a new host headset, please follow the instructions in previous guideline to clear the remote headset’s pairing memory and then pair it with the new host headset.
Note: If you have multiple Accsoon CoMo host and/or remote headsets, follow previous guideline to arrange the pairing memory of each host/remote group. Two seperate groups of Accsoon CoMo can work in the same place without interference.
The pairing mode will last for 120s. The headsets will automatically exit pairing mode.If host/remote headsets are unable to pair up within the time limit, follow previous guideline to restart pairing.
If your host headset has already memorized 8 remote headsets, to replace the remote headsets, please follow the steps below to clear the existing pairing memory.
1. Switch your host headset power switch to “ON”.
2. Press and hold both the volume up “+” and down “-” button for 3 seconds. The host headset’s indicator will alternately flash red and green lights, indicating that the host headset has entered the memory clearing process.
3. Once the pairing memory is fully cleared, the host headset’s indicator will change to slow green flickers.
Note: You only need to execute the pairing memory clearing process on the host headset. After you fully cleared the memory of the host headsets, please follow previous guideline to pair up the host and remote headsets, The new pairing information will be automatically memorized after successful pairing.